Sometimes I am in the mood for instant gratification. And by ‘instant gratification,’ I mean two-to-three-hour gratification.
What I mean is: I wanted to feel like I did something productive with my day, so I decided to start and finish a doll in one sitting.
Mostly it’s an excuse to watch a movie. My repainting movie tonight was Mission Impossible II, which is a terrible movie, as it turned out.
So in an effort to feel productive, I grabbed one of the three blond Moxie rescue dolls I have lying around and the TV remote, and pressed play.
So there’s the ‘Before.’ Honestly, compared to Bratz, Moxie dolls are already pretty made-under. But I have enough of an ego to believe I can make her look cuter.
FIRST STEPS – PREP
–> The first of the first steps is to seal the doll’s face with a sealant that has some tooth with it. THIS IS REALLY IMPORTANT! In order to get good color build up on the doll’s face, the face has to be sealed first. Otherwise the pigment won’t stick to the vinyl and the colors will be very faint.
For a more-detailed explanation about how to prep a doll for repainting and the materials involved, please see this post: Repainting First Steps
Note on sealing layers: I do my made-under dolls in two layers. So I seal the plain vinyl (with no makeup at all); do the first layer, which includes the eyes, eyebrows, and mouth; seal that layer; add the second layer, which includes some little details and the cheeks; then seal for a final time. You can seal more or less often depending on your preferences.
To learn how I fixed this girl’s hair, go HERE!
Photo 2 was taken while fixing this doll’s wobbly head. Thankfully, Bratz and Moxie dolls are pretty easy to fix (unlike the Monster High heads). I won’t take credit for this method: Novastar Dolls has a helpful video on how to do this; I learned from that. The only change I made to her video was to heat the doll’s head up with hot water before popping it off and on again. The hot water heats the vinyl head and softens it, making it easier to pull the head off.
Next (after the head was reunited with it’s body), I wrapped the hair and hard plastic body in saran wrap and sprayed the bare face with a layer of Mr. Super Clear.
The eyes. Getting the eyes done takes the most time, so I do that first. I also just kinda want to get it out of the way.
First I use a dark brown watercolor pencil to get the rough outline of the eyes down. Because I was planning on making the upper lid a little thicker than normal for this doll, I didn’t worry about making the eyes perfectly symmetrical at this point. You can see in photo 3 that they’re pretty different.
Then I go back and draw over the outline, making the lines thicker in certain places to get the two eyes as symmetrical as I have the patience for. (Photo 4).
Eyelids. After the outline of the eye is in good shape, I add the eyelids. Usually I draw two lines for the eyelids, but you can do as many or as little as you like.
Eyebrows. As I’ve mentioned in other tutorials, eyebrows do the most expressive work of any characteristic on the doll’s face. Basically, whatever expression you want the doll to have, the eyebrows are going to be your best friends.
I use a pale pink watercolor pencil to pencil in the eyebrows, shown in Photo 5. I use pink because it usually doesn’t show up under the pastel. This little gal got asymmetrical brows. It gives her a bit of sass.
After penciling the brows in, I lightly erase them until they are very, very faint (Photo 6). This ensures that the pencil marks don’t show up under the pastels.
Then I apply pastel dust with a 10/0 flat brush to the pencil outlines (Photo 7). Getting very light colored (read: blonde) eyebrows is almost impossible with pastel dust, so I combined some light brown and yellow dust and used that. The outer edges of the brows got darker pastel dust than the inner edges.
The next steps are combined in Photo 8. First, I used pastel dust to do a bit of shading on her eyelids (brown, pink, and orange pastel dust). Second, I filled in the whites of her eyes with a watercolor pencils. Third, I added some color to her lips (otherwise she looked like a zombie and it was creepy).
Lips. I use a small brush to scrub pink/dark pink/red pastel over the lips (Photo 8). It can be difficult to build up color, so I use quite a bit of pastel dust. Residual dust flies everywhere (all over her nose, chin, and cheeks), but that dust will brush away easily.
The larger brush in Photo 9 is an eye-shadow brush (the Q-Tip can give you a size reference), which I use to brush loose pastel dust off the doll’s face. I also use it to apply blush to the cheeks. The smaller brush is a weird eyeliner brush that I use to apply pastel dust to smaller areas, like the lips.
*Seal this layer!*
I seal at this point to protect the color on the lips, the shading on the eyelids, the eyebrows, and help the color of the irises (next step) really pop.
Irises. So when you get tired of your doll looking like a soulless zombie, go ahead and add the pupils. This gal (I really need a name for her) is getting side-glancing eyes, because those are my favorite with a raised eyebrow. It’s by far my favorite look for a doll.
I set the irises with a light blue pencil, then outlined them with a dark blue pencil (Photo 10). Side-glancing irises will never be perfectly symmetrical because the shape of the inner and outer eye is different, so I don’t worry as much about making them symmetrical.
Pupils. Then I begin shading in the pupils. I use a ‘soft pupil’ look, where the pupil sort of fades into the iris. It’s very unnatural and if a real person had this they’d probably be blind. Then again, if us real people looked anything at all like dolls we’d be missing half our organs.
I use a dark blue pencil to begin shading the pupil, but you can use any color that will go with blue. I shade using small circular motions, making sure that the darkest area is in the same place on each eye–that’s the direction of her gaze. (Photo 11).
Then I shade over the dark blue with a black pencil (Photo 12). When the pupils are dark enough and fade nice and gradually into the irises, they’re done!
If you want a more traditional ‘hard pupil,’ it’s actually much easier. Just outline it in over the iris, then fill the outline with black (Photo 13). Make sure they’re symmetrical. Otherwise the poor doll will be forever cross-eyed.
Facial details. Next I added a few little details to her eyes (Photo 14).
First, I applied another layer of white pencil to her sclera (new word! = whites of the eyes). Second, I changed her upper lashes from brown to black by going over them with a black pencil. Third, I drew in faint eyebrow hairs with a dark brown pencil. I drew the left eyebrow hairs in first by turning her upside-down. Fourth, I added tear ducts.
Blush. Now for the easy part (finally!). Blushing the cheeks is pretty simple. I use my eye-shadow brush (shown in a photo somewhere up there ^), dip it in bright pink or red pastel dust, and just lightly dab it onto her cheeks (Photo 15). See? Simple. I wouldn’t lie to you.
She’s pretty much done at this point.
*Seal this layer!*
This is the final time I will seal the doll. The sealant protects the blush, the pupils and irises, and all the other little details we added.
Eye reflections. Take a tiny bit of white paint, water it down a bit (or use a fluid retardant like I do), and use a teeny-tiny brush or toothpick to apply a white dot–or two, or three–to the eyes (Photo 16).
Be sure to apply the dots in the same place in each eye. Don’t measure it by where the dots are in relation to the pupil (especially if the eyes are side-glancing), measure the dots by where they are in relation to the upper or lower lid. This helps me align the reflections in both eyes correctly.
Varnish. The LAST STEP! YOU MADE IT! See that wasn’t too bad, right? Took you, like, ten minutes from start to finish, right?
This is a pretty simple step, shown in Photo 17 below (barely shown. It’s hard to photograph). Use a brush to apply a shiny varnish to the eyes (avoid the eyelashes). I also glossed this girl’s lips, although I don’t often do that with my made-under dolls. If necessary, apply a couple coats.
Note on varnish. I mentioned this in my post about materials, but some varnishes apparently dry tacky. Those varnishes probably don’t like the vinyl the doll head is made with–few sealants like this material, which is why you have to be a little careful with what you brush or spray onto your doll’s face. Anyway, I use a Delta Ceramcoat gloss interior varnish. It’s for use over acrylic or oil paint, but it fully dries on the dolls, so I’ll take it. It’s an ancient bottle, so I’m not even sure if Delta makes this type of varnish anymore.
Unfortunately this little girl won’t be available in my Etsy shop for some time…She needs a new outfit and my sewing machine access hovers in between non-existent and not-worth-it.
If you repaint a doll using this tutorial, please show me your results by posting a picture of the doll (either finished or in progress) to my Facebook page! As always, if you have any questions about my methods or process, don’t hesitate to ask a question in the comments below.